من سعی کردم با روش پالس با ATmega 16 با یه شماره تماس بگیرم ولی هر کاری می کنم نمی شه با توجه به چیزایی که خوندم راجع به شماره گیری به روش پالس همه چی درسته ولی جواب نمی ده. :angry:کسی هست بتونه کمک کنه؟؟
اینم کدم:
اینم کدم:
کد:
/*****************************************************
This program was produced by the
CodeWizardAVR V2.04.4a Advanced
Automatic Program Generator
© Copyright 1998-2009 Pavel Haiduc, HP InfoTech s.r.l.
http://www.hpinfotech.com
Project :
Version :
Date : 1/3/2012
Author : NeVaDa
Company : Home
Comments:
Chip type : ATmega16
Program type : Application
AVR Core Clock frequency: 8.000000 MHz
Memory model : Small
External RAM size : 0
Data Stack size : 256
*****************************************************/
#include <mega16.h>
#include <delay.h>
// Declare your global variables here
int j;
int unit(int i)
{
for(j=0;j<i;j++)
{
PORTA.0=1;
delay_ms(60);
PORTA.0=0; //eshghale khat
delay_ms(40);
}
return 0;
}
void main(void)
{
// Declare your local variables here
// Input/Output Ports initialization
// Port A initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=Out
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=0
PORTA=0x00;
DDRA=0x01;
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTB=0x00;
DDRB=0x00;
// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;
// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=P State5=T State4=T State3=T State2=T State1=T State0=T
PORTD=0x40;
DDRD=0x80;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=FFh
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=FFh
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
while (1)
{
PORTA.0=1;
if(PIND.6==0)
{
PORTA.0=0;
delay_ms(5000);
unit(10);
delay_ms(300);
unit(9);
delay_ms(300);
unit(1);
delay_ms(300);
unit(2);
delay_ms(300);
unit(8);
delay_ms(300);
unit(1);
delay_ms(300);
unit(9);
delay_ms(300);
unit(7);
delay_ms(300);
unit(6);
delay_ms(300);
unit(2);
delay_ms(300);
unit(1);
delay_ms(50000);
PORTA.0=1;
}
};
}
و بعد 5-6 ثانیه هم بوق اشغال می زنه :angry:
oo:
دیدگاه